Introduction to GSM camera:-

GSM camera is compact mobile surveillance and monitoring system for transmission of high resolution Video and Single image via GSM network. The video and single image can Be viewed on a pc or handheld device and it can be transmitted to FTP-server or by email

* Video clip (desirable time duration) and/or single snapshot images
* JPEG and MPEG-4 compression
* Images can be saved on a local microSD card
* Lens can be selected according to user requirements and needs
* Built-in microphone for audio surveillance
* Built-in Web server for monitoring via standard browser
* Quad Band 850/900/1800/1900 MHz GPRS/EDGE network

a>package

1>Edge camera DOWNLOAD PDF
2> External GSM antenna

3>Ac/Dcpoweradapter

4> Usb cables DOWNLOAD PPT

5>Angle mount bracket
6>Cd with software drivers and mannual

B> Requirements

The sim card which is mandatory for gsmConnection to gsm network .The sim card maybe purchased from gsm mobile service provider

C>device familiarisation

D>HARDWARE INSTALLATION

HOW TO INSERTING SIM CARD-:

Insert the SIM card into holder with the metal contact facing the SIM connector side

Attaching antenna

Screw antenna in clockwise direction and position upward antenna at its connecting

Attaching camera on pad

E>Camera access software and drivers

After installation hardware connect powersupply to the camera, and then and then connect camera to the usb port insert supplied with camera into CD-romdrive of your pc and run setup.exefilelocated in the cd and follow the instruction

F>Connection to camera connection tool-:

Unplug camera power supply and Usb.and then connect power supply to camera and
also connect usb wait for power and ready led to light up. And follow instruction

To access camera web interface, connect the camera using tool after successful connection
open webserver ip add (http://10.0.0.1)
After this loginpage and put username and password as “admin”

G> Creating an account in DynDNS.org
Steps to Create Account in DynDNS.com Minimize

1. >visit http://www.dyndns.com/

2.> Click option CREATE ACCOUNT on TOP right

3. >Enter username, email and other details , once this is complete U WILL recieve EMAIL from DynDNS

4. >click the link in EMAIL to complete the REgistration Process

5>Once logged in to ur DynDNS account, Select option SERVICES

6 >Select DYNAMIC DNS option

7>select Dynamic DNS Free:

8>click GET STARTED

9> select host name, (give companyname and select DynDns.org in drop down)

Ur URL will be company.Dyndns.orgselect “Use auto detected IP address .237.255.181.”do not change anything else and click “ADD TO CART”

It will show summary of your CART with AMOUNT $0.00, CLICK NEXT to continue

Finally click on “ACTIVATE SERVICES”, to actually start using ur Domain

H> WEB configuration page interface structure-:

after completion all above things , it will be web management system for user to interface with camera

Technical specification

1> Image
image sensor: VGA (640×480) pixel
image resoultion : VGA/QVGA/ QQVGA
image compression: jpeg

2> powersupply
main adapter 12v dc 1A
Internal back-up battery NIMH 9v ,250mah
Battery charging time 9hours

3> electrical chara
norminal power supply voltage: 12V
Management
current consuption when ideal : 100MA
current consuption when operating: 250MA

operation

in this above fig edge camera is connected to pc and here input is PIR sensor and door sensor and input power supply wiil be in range of 230v and in their any change in sensor and it trigger camera and camera start function

a>connection camera with door sensor

Connection Camera with PIR sensor